Dealers Wanted
   Znen  Lance Milan 150 Moped (150T-F)       Znen 150cc Moped, Model  150T-F   (We have some body panels for this model, just  ask.)

 Lance Milan 150T-F Seat  (Black) $69
Lance Milan 150T-F Muffler Assembly $95
Lance Milan 150T-F Fork Assembly $66
 
 Zen 150T-F Rear Disc brake style Rim (2.5-12)  $90		  
Zen 150T-F Front Disc Rim (2.5-12)  $85
 Znen 150T-F Lance Milan 150 Front Brake assembly (2-chamber, Bolt hole spacing:130mm eye to eye measurement) $95

 Znen 150T-F Lance Milan 150 Rear Brake assembly (2-chamber, Bolt hole spacing:43mm eye to eye measurement) $100
 Znen 150T-F aftermarket Windshield kit $60     
Znen Lance Milan 150-F Lock Set $48

Lance Milan 150 Left Switch (8-Pin Plug) $20
Lance Milan 150 Right Switch (3-Pin Plug) $20
Lance Milan 150 Left Grip $8, Right Speed Controller $10, Set $16

Lance Milan 150 Odometer Cable (45 1/2 inch) $16
Lance Milan 150 Odometer Gauge $39
Lance Milan 150T-F throttle (Gas) Cable (79inch) $15

Lance Milan 150T-F Rear Shock Set (14 1/4 inch, eye to eye 13 1/2 Inch) $79

  

Lance Milan 150T-F Front Shock Set (11 1/4 inch, eye to eye: 10 1/4 inch) $65

Lance Milan 150T-F Wire Harness $49

Znen 150T-F Left And Right Hydraulic Break Lever $24

Znen 150T-F Left Hydraulic Break Lever $12

Znen 150T-F Right Hydraulic Break Lever $12

Lance Milan 150T-F Disc Break Rocker Arm $20

Znen 150T-F Rear Break Caliper $46

Znen 150T-F Front Brake Hose $14
   
Maximum Speed   90Km/h         Fuel Capacity  1.95 gallon      Brake Type  Front Disc, Rear Disc    Engine Type  4-stroke, Single, air cooled 150cc motor.       Tire size  120/70-12,  120/70-12     Battery  12V/9ah       Starting System  Electric/Kicks          74 mpg
AKA: Premier 150, La-Vie 150, Milan 150
     


Jonway 150T-2 AirBox Assembly $48   

Lance Milan 150T-F Front Axle Bushing (19mm X 44mm) $4 

Znen150T-F Fork Kick Stand $35 

Lance Milan 150T-F Front Wheel Axle(10 1/8 inch long, 12mm Diameter) $8

Lance Milan 150T-F Odometer Drive $20

Znen GY6 150cc CDI (fits only the Znen brand of Mopeds)$23

Lance Milan 150T-F Rotor (190mm diameter, 58mm center hole, 3mm thick, 3 bolt hole: 70mm bolt hole spacing) $24

Znen 150T-F Right Master Cylinder With Lever $30

Znen 150T-F Kick Stand (8 3/8 inch) $14

|| Show All Gas Scooter Parts  Page 2 | Show All Electric Scooter Parts Page 2 | Find Gas Scooter Parts by Scooter Style|   Find Electric Scooter Parts by Scooter Style|

     order@ScooterParts4Less.com|  | Order Info | Technical Tips |

Znen 150cc CVT Black Cover (Long Version) (fits only the Znen brand of Mopeds)$60

Znen 150cc CVT Silver Cover (Long Version) (fits only the Znen brand of Mopeds)$60
 Znen GY6 150cc Scooter 12-coil Stator (29mm center hole diameter, 42mm diagonal bolt hole spacing) (fits only the Znen brand of Mopeds)$38  

Znen 150cc 12-Coil Magneto Housing (fits only the Znen brand of Mopeds) $36

Znen 150cc Rocker Arm Holder (fits only the Znen brand of Mopeds) $24
 Znen 150T-F headlight cover $9

Znen 150cc Timing Chain Guide set (fits only the Znen brand of Mopeds)$12

Znen 150cc Chain Tensioner (fits only the Znen brand of Mopeds)$16

Znen 150cc Ignition Coil (fits only the Znen brand of Mopeds) $24

Znen 150cc Ignition Coil (1-prong version) for Znen Brand Motor $24

Znen 150cc Cylinder Kit (fits only the Znen brand of Mopeds) $79

Znen 150cc Crankshaft (fits only the Znen brand of Mopeds)$69

Znen 150cc CVT Cover Gasket (Short Version) (fits only the Znen brand of Mopeds)$7

Znen 150cc CVT Cover Gasket (Long Version) (fits only the Znen brand of Mopeds) $7

Znen 150cc Camshaft (fits only the Znen brand of Mopeds)$24

Znen 150cc Rectifier (fits only the Znen brand of Mopeds)$22  

Znen 150cc Timing Chain (11 inch, 90 Link) $12

Znen 150cc Variator (Pulley) (fits only the Znen brand of Mopeds)$40

  GY6 125cc/ 150cc Kick Start Gear Shaft (spindle) Version 1, 130mm total length $20
 GY6 125cc/ 150cc Kick Start Gear Shaft (spindle) Version 2, 170mm total length $20
GY6 125/150cc Turbo Fan $29 
 Lance Milan 150 Seat  (Tan) $69
 GY6 125cc/150cc HP Clutch Drum (Bell) $49		  
Keihin CVK Performance GY6 125cc/150cc Carburetor: 25mm outside, 32mm outside, 42mm air filter Intake  $150

GY6 Moped 125cc-150cc Performance Muffler (Stainless Steel)  $179 Fits all 125cc/150cc that use dual shock in the rear
 GY6 125cc/150cc Vacuum Fuel Pump (stock)  $30
 GY6 Fuel  Valve $12
KOSO HP  28mm Carburetor kit (for GY6 Mopeds) $130
4-stroke Carburetor Bowl Gasket $2.70 each 

Znen Fork Neck/Bearings (Set of 7 - 50mm, 44mm, 43mm, 43mm, 40mm, 36mm, 31mm) $16 

GY6 125cc-150cc Final Drive Gear (51Tooth/19Tooth) $20

 
 GY6 125/150cc Manifold  (30mm diameter rubber part, 22mm diameter metal intake) (1 outlet) $15
 GY6 125/150cc Manifold  (30mm diameter rubber part, 22mm diameter metal intake)  (2 outlet) $15

GY6 125cc/150cc manifold (rubber part 30mm diameter, metal intake 22mm diameter) (2 outlet, Extended Version) $20

Znen 150cc Head $58

 

GY6 Moped 150cc Discharge Resistance $20

GY6 125/150cc Counter Shaft Gear $40
 GY6 cvt belt (835-20-30) $26
GY6 125cc to 150cc Carburetor: 24mm outside, 32mm outside, 38mm air filter Intake  $68
 GY6 125cc/150cc Clutch Assembly $65
GY6 125cc/150cc Valve Assembly $26

GY6 Billet Dip Stick (7.8cm) $20

GY6 150cc Performance Roller Weight set (9g, 10g or 11g set) $20 per set
GY6 150cc Oil Pump $20

GY6 50cc-150cc Muffler Screw Set (6mm) $6
 GY6  Belt (842-20-30) Gates Powerlink  $35
 GY6 150cc Piston Rings set (57mm) $12
Repair Kit for GY6 125/150cc Carburetor $16

 GY6 150cc Gasket set $20
 Electric Choke for GY6 125cc/150cc Carburetors $19

GY6 150cc Starter Clutch Assembly (50Tooth) $36

GY6 125cc/150cc Rear Drive Shaft (Version 1) (173mm) $28

GY6 125cc/150cc Rear Drive Shaft (Version 2) (186mm) $28

  

Znen 125cc/150cc Head Cover $36

GY6 150cc Valve Cover Gasket $3

GY6 150cc Cylinder Gasket $8

Break Hose Screw 10mmx29mm $2

Znen 150T-20 Head Light (also fit znen 150T-F) $30
 GY6 150cc Timing Chain 90 Links (11 inch long) $12 		 

Znen 150cc Rectifier $22 

 
           

GY6 150cc Oil Pump Chain $10
GY6 150cc Piston Rebuilt Kit  $38
GY6 50cc to 150cc 30.50mm Exhaust Gasket  $2
 GY6 Solenoid  $14   		  gy6 125/150cc rightside crankcase
GY6 125/150cc Right Side Crankcase $50 		 

 
GY6 125cc to 150cc Starter  $51 

 Iridium Performance Spark Plug (CR8HIX) $17
NGK Racking Cable (CR2) $29   
GY6 125cc/150cc motor Stock Ignition Coil  $25  
GY6 Mini 3-Way Remote Fuel Valve $13  
 GY6 Stock Spark Plug (50cc to 150cc) $2.50
orange HP Ignition Coil for GY6 motors  50cc to 150cc motor $29  

GY6 125cc/150cc Final Drive Shaft (version 1, 19 Splines, 194mm length, Diameter at Bearing End: 26mm, Diameter at Smooth End: 16mm) $23
GY6 125cc/150cc Final Drive Shaft (version 2, 19 Splines, 196mm length, Diameter at Bearing End: 26mm, Diameter at Smooth End: 16mm) $23
GY6 50cc to 150cc 30.50mm Exhaust Gasket  $2  
ABS Upgrade (10mm tread) $16
GY6 150cc Piston Rebuilt Kit (57mm diameter, 15mm wrist pin)  $37  

GY6 125cc-150cc Performance Jet Set $9

 GY6  50cc to 150cc Dipstick (8.2cm long) $8  
 GY6 125cc/150cc CamShaft (34 tooth) $28
 GY6  125cc/150cc Variator  V-Slide  set   $3.80
 GY6 150cc Fan Cover $6

GY6 120cc/150cc Kick Starter Idle Gear $20


 GY6 125cc/150cc Timing Chain Guide set $10 

           

GY6 125cc/150cc Crank Bearing $11 
 GY6 125cc/150cc Koso HP Pulley $50		 GY6 150cc Clutch Shoe Set
  GY6 150cc Clutch
 GY6 150cc Valve set $18
 GY6 125cc/150cc Clutch Drum (Bell) $20		  
 GY6 125cc/150cc HP  CamShaft $59

 GY6 150cc  57mm Cylinder  Kit $76  
 GY6 58.5mm Alloy Big Bore  Kit $250
  GY6 125cc/150cc Stock Variator (Pulley) $45
 GY6 125cc/150cc Isolater (23mm center hole, 45mm bolt hole spacing)  $4

Znen GY6 150cc CDI $23
 GY6 125cc/150cc Racing Clutch   $75
Shoe Set $25
 GY6 125cc/150cc HP Clutch Spring set (1000 RPM) $10
 GY6 125cc/150cc HP Clutch Spring set (1500 RPM) $10
 GY6 125cc/150cc HP Clutch Spring set (2000 RPM) $10
4-Stroke 42mm Shielded Air Filter (fit's GY6 125cc/150cc motors) $20

Znen Fuel Lever Sensor (Fuel Level Sending Unit) $22

GY6 HP Manifold (Aluminum intake 27mm/ Rubber intake 32mm ) $36		 slider roller weight set
  GY6 150cc Slider Weight set (11 gram) $20 		slider roller weight set
  GY6 150cc Slider Weight set (12 gram) $20 		slider roller weight set
  GY6 150cc Slider Weight set (13 gram) $20

slider roller weight set
  GY6 150cc Slider Weight set (14 gram) $20


  Moped Orange Round Reflector $4

Moped Chrome Mirror Set (8mm) $40 
  Moped Red Rectangle Reflector $4
Wire Tie (30 set) $2, 300 set $14 
  4-Stroke Fuel Line  $2.50 per Foot
 4-Stroke Performance Fuel Line (Yellow or Green) $8		  

TreadLocker (Med Strength, 50 Gram) $10

Small Stainless Steel Scooter Trunk (widest point = H:9.5" W:11" L:14") Fit 1/2 Helmet $30

Large Stainless Steel Scooter Trunk (widest point = H:10" W:13" L:16") Fit Full size Helmet $35
Moped Trunk (Black) $45 (widest point=H10" W13" L13.5") 

Moped Small Heavy Duty Trunk (widest point = H:10 1/4 inch, W:17 3/4 inch, L:15 inch) $76

  

Moped Large Heavy Duty Trunk widest point = H:11 1/2 inch, W:21 7/8 inch, L:16 1/8 inch $90

GY6 39mm Crank Tool $16

GY6 50cc-250cc Clutch Tool(39mm/41mm) $24
 GY6 Kick Starter (Round Pedal Version) $14
Universal CNC Mirror set (fits Moped, SuperBikes, ATVs) comes with 3 different tread screw set $59        
Moped Chrome Mirror Set (10mm) $40		  
Moped Chrome Round Mirror Set (8mm) $28

Moped Master Cylinder with Mirror Holder (Skinny, Black Color, Left Side) 53mm L X 66mm H X 27mm W $20
Moped/ATV/Dirt Bike Master Cylinder (Wide, Silver Color, Left Side) 53mm L X 46mm H X 36mm W $20
Moped/ATV/Dirt Bike Master Cylinder (Skinny, Black, Left Side) 53mm L X 64mm H X 28mm W $20


Moped Right Master Cylinder With Lever and Mirror Holder (Skinny, Black color) 53mm L X 69mm H X 27mm W  $30
Moped Master Cylinder with Mirror Holder (Skinny, Black Color, Right Side) (53mm L X 68mm H X 27mm W) $20

Moped/ATV/Dirt Bike Master Cylinder (Wide, Black Color, Right Side)53mm L X 41.5mm H X 36mm W $20

Moped Kill Switch (4 Wire Plug) $5

Moped Horn Switch (2 Wire Plug) $5

Moped Passing Switch (4 Wire Plug) $5

Moped Turn Signal Switch (6 Wire Plug) $5

Moped Light Switch (6 Wire Plug) $5

  

Moped Starter Switch (2 Wire Plug) $5

Moped Stock Fuel Filter $2.50 

Moped Master Cylinder with Mirror Holder (Skinny, Black Color, Left Side) 53mm L X 64mm H X 28mm W $20

 

Moped/ATV/Dirt Bike Master Cylinder (Wide, Silver Color, Right Side) 54mm L X 49mm H X 36mm W $20 

 

Moped High/Low Beam Switch (3-Wire Plug) $5
Moped Blank Key set ( Ver. #1)  $5		    
Moped Blank Key set ( Ver. #2)  $5

Moped Blank Key set ( Ver. #3)  $5		  
Moped Blank Key set ( Ver. #4)  $5		  
Moped Blank Key set: foldable ( Ver. #5)  $5
 Tire Popper Tool  $38
 GY6 Kick Starter (Flat Pedal Version) $16  		 
 4-Stroke Battery (12v,9AH ) Acid Insert style $42  

 Lance Milan 150T-F Chrome Mirror set $40

flywheel puller

Universal Flywheel Puller (for Moped, ATV, & Dirt bikes) $29

 bearing pull tool kit
Bearing Puller kit $40		 GY6 150cc HP Muffler Matte Black
GY6 Moped 150cc High Performance Muffler (Matte Black Finish) w/ Sound Adjust $210
Battery Strap (5 Inch Long)  $2.50 		brake switch wire
Brake Switch Wire $3

  border=0>